Office 956-725-4937
Fax 866-493-2458
Email Us


Services & Equipment

Home | Services & Equipment

Our fully certified team of operators and riggers understand your service needs.

Hydrostatic Test Pump and Nipple Up Services

  • Pump 15,000 psi @ 8.8 GPM
  • Well head Services & Lubricators
  • Tubing & Casing Testing
  • Chart & Digital Recorder Services
  • Nipple-Up Services with Hydraulic Torque Wrenches

Backside Pumps

  • 1 ½ to 2 BPM @ 10,000 psi
  • Tubing & Casing Testing
  • Pipeline Separators Testing
  • Chart & Digital Recorder Services
  • Nipple-Up Services with Hydraulic Torque Wrenches

Big John / Quintuplex Pump

  • 5 BPM @ 8,500 psi
  • Great for 1 ¼ & 1 ½ Coil Tubing Backup Pump
  • Circulating Wells, Tubing & Casing Testing
  • Pipelines & Separators Testing
  • Chart & Digital Recorder Services

Shake Rattle / HT 400 Pump

  • 8.5 BPM @ 14,000 psi
  • 4” Plungers Standard Transmission
  • Great for Coil Tubing, Pump Downs, Circulate Wells, Sand Plugs & Gel Pills
  • Unit has 20 BBL mixing tank/2- centrifugal pumps

THOR / HT 400 Pump

  • 8.5 BPM@ 14,000 psi
  • 4” Plungers with Automatic Transmission
  • Great for Pump Downs, Circulate Wells, Coil Tubing & Well Break Downs

Duo Service Floor Manifold

Maintain backside pressure and test lubricators for wire line after frac job Savings of extra hydrostatic test pump on location.

Mobile Dust Collectors

For Dust Control on Fracking Sites

Using a Cyclone Dust Collector can safely and cost effectively captures 99.8% of all airborne silica dust particles that are present at oil and natural gas well fracking sites in order to lower silica dust exposure, provide healthier air quality, and meet EPA and

OSHA regulations for silica dust exposure.

OSHA claims that exposure to crystalline silica kills hundreds of workers and sickens thousands more each year through lung cancer, silicosis, chronic obstructive pulmonary disease, and kidney disease.

"Exposure to silica can be deadly, and limiting that exposure is essential. Every year, many exposed workers not only lose their ability to work, but also to breathe. This proposal is expected to prevent thousands of deaths from silicosis – an incurable and progressive disease – as well as lung cancer, other respiratory diseases, and kidney disease. Workers affected by silica are fathers, mothers, sisters and brothers lost to entirely preventable illnesses. We're looking forward to public comment on the proposal."

- .Dr. David Michaels Assistant Secretary of Labor for Occupational Safety and Health


  • 32 filter, vertical top loading cartridge design
  • 80 hp Tier 3 John Deere diesel engine
  • Filtering capacity of 20,000 CFM at 12” w.c.
  • 8320 sq. ft. of primary filter area for an air to cloth ratio of 2.4:1
  • Solid state, programmable timer board for reverse air pulse filter cleaning system
  • (4) 16” Inlet duct ports (2 each side)
  • DOT approved trailer lighting and reflective recognition tape
  • Hydraulically driven unloading augers

Crane Service

10 and 26 Tons Cranes

Our fully certified team of operators and riggers understand your service needs and can deliver when and where you want or need it. Our top quality services provides zero tolerance for unsafe practices.

Frac Heads

The frac head is designed to provide systematic and safe fluid flow while pumping high volumes at extreme pressures during frac completions. The frac head diminishes the risks normally associated with using substandard equipment. The frac head is available in various wellhead connection sizes and two pressure ranges with 2-in, 3-in, or 4-in 1502 frac inlets and constructed with 15,000 psi or 10,000 psi working pressure flanges.

To enable more effective fluid flow, the frac head is designed to give frac companies access to at least four or six inlets configured at 35°angle. In addition, full bore on the 4-in inlets allows for unrestricted pump rates. Also available we have a full stock of frac plug valves for your service. Available are 4-1/16 15,000 psi (103Mpa) and 5-1/8 15,000 psi (103Mpa).

  • 5-1/8 in 15,000 psi (103Mpa) or 10,000psi (69Mpa)
  • 4-1/16-in 15,000 psi (103Mpa) or 10,000psi (69Mpa)
  • Frac heads a manufactured with either 15,000 psi (103Mpa) or 10,000psi (69Mpa) working pressure flanges
  • Available 1502 Weco® flanges to accommodate frac inlet sizes of 2-in, 3-in or 4-in
  • Inlets are positioned at 35°angles to help optimize efficiency of high volume fluid flow.
  • Machined from solid stock for enhanced durability.
  • Assembled with stainless steel ring gaskets to withstand the effects of sour gas.

Isolation Tools / Well head Protection

Tubing Tools

  • 2 3/8- 12 bbls per minute
  • 2 7/8 – 28 bbls per minute
  • 3 ½ - 38 bbls per minute
  • 4 ½ - 38 bbls per minute low rate

Casing Tool coming soon

Zipper Manifold

  • 4 1/16 15K Valves with Crosses; all crosses are 3 inch 1502 inlets and outlets
  • Great for dual frac wells

Water Tank Trucks

  • 1,500 gals to 130 bbls to fit your pumping needs
  • KCL, Acid, as well as other chemicals are available

Design and Development
Liquid Web Studio
Powered by
SiteChamberTM CMS